(Item Code: FID-50)
Flame Ionization chromatographic detector. The FID 50 (GC FID Detector) is a standard 19" rack module, 4U high. Rackable unit combining a detector and a data acquisition system.
Unit to be used in combination with a system of chromatographic valves and columns. Analyzes impurities in different gases
Characteristics
- A Oxidizing gas Synthetic Air - Pressure 2 bars - flow 20 l/h
- H2 combustible gas - Pressure 1 bar - flow 2 l/h
- Carrier flow between 2 and 6 l/h
- Carrier gas argon, nitrogen, helium or hydrogen
- One chromatographic input
- 1 input for continuous signal
- 6 digital inputs
- 16 output relays - 220 Vac 1A
- 1 LPT printer output
- Output 4-20 mA for maximum 8 impurities
- 2 RS232 outputs
- Memory potential of 20 chromatographic data
- Linearity +/- 1%
- Detection limit < 1 ppb
Accuracy :
- 5% of the reading scale
- Drift : 1 % during 24 hours
- Gas Connections : 1/8'' Swagelok SS
- Sample flow : ± 4 l/h
- Max Input Pressure : working pressure from 0.2 to 1.5 Bar
- Working Temperature : Ambient and stable temperature (± 20°C)
- Power supply : .220 Vac, 50-60 Hz
- Consumption : 500 VA
- Output 4-20 mA : 1 output for N2 impurity
- Connector RJ-45 : Computing maintenance of the system
- Output relays : (dry contacts, SPST 2A / 250 Vac)
General characteristics
- Continuous measurement system based on the
- System controlled by microprocessor.
- Easy to use.
- Easy maintenance.
- Weak sample flow.
- Less power consumption.
- CE Analyzer.
- Alphanumeric screen 8 x 40 characters, 64 x 240 pixels.
- Multifunctional and real-time software.
Dimensions
- Height : 4U
- Width : 19"
- Depth : 450 mm
- AZ 5000
Continuous analysis of N2
- Argon
- Analog Input
- Analog Output
- Relays
- Remote access
- Calibration Param
- Alarm Levels
- Range
- Load/Save